A sign that comes off as quickly as it goes on

A magnetic sign is not glued: it presses flat against steel and holds by itself. You dress the door of your company vehicle during the week, take the sign off on Friday evening, and the car is unbranded again for the weekend. The same goes for a metal shopfront, a roller shutter or a workshop board: the message changes without glue marks, without a scraper, without solvent. You get the sign back intact after use, and you can put it up again as often as you need.

Three conditions for a hold that really works

A magnet needs a ferromagnetic surface, and not every vehicle body is one. The test takes a second with a fridge magnet, before you order. The surface must then be flat, because a ridge or a strong curve reduces contact, and therefore grip. Finally it must be clean and dry when fitted: dust and grains of sand create a gap between the magnet and the panel. Lay the sign flat without sliding it, and store it flat.

From 40 x 60 to 80 x 120 cm, or your own dimensions

Thirteen preset sizes are available, including 40 x 60, 50 x 50, 50 x 70, 50 x 80, 50 x 120, 60 x 80 and 80 x 120 cm. The small ones work as magnetic door signs, the large ones as message panels on the side of a vehicle or a workshop door. If none fits exactly, you enter the height and width freely: a sign sized to the flat part of your bodywork is better than a standard size that runs over an edge.

The outline of your logo, in a removable version

On a sign that comes off on Friday evening, a rectangle shows; a drawn outline reads. A straight cut gives a clean sign, a contour cut follows the outline you give us: a logo, an arrow, the silhouette of a trade. From a distance, people read drawn-on branding, not a panel stuck there. On the print side, CMYK carries photographic visuals, while white and CMYK + white handle light backgrounds and knock-outs. Gloss lamination brings colours to life, matt limits reflections on a panel in full sun, and a gloss lamination with anti-UV and anti-corrosion treatment is available when the sign spends its days outdoors.

Printed in Manciet, in the heart of the Gers

Your file is processed in our Manciet workshop and the printing never leaves Occitanie. You set the lead time when you order — standard, express or urgent — depending on whether it is a planned job or a vehicle that needs dressing in a hurry. The quantity is up to you: one magnetic sign for a single van, or a pair per vehicle for a whole fleet, with the same file and the same result from one batch to the next.