Which fabric for your display wall?

The wall uses a 260 g/m2 stretch-knit cover. The fabric gives in both directions: it follows the tubular frame and transport creases disappear once tension is applied. Knit diffuses light rather than bouncing it, so no hot spots appear under exhibition-hall spotlights. If your artwork has dark backgrounds, or the stand sits against a lit partition, add the blackout lining behind the print to stop light coming through.

Available sizes

235 x 238 cm covers a corner stand or a 6 m2 space, the most common size at regional shows.

295 x 238 cm matches a 9 m2 stand and leaves room for a counter in front.

395, 495 and 595 x 238 cm build a continuous backdrop across wide stands, in place of a painted partition.

Height stays at 238 cm across the range, a dimension most exhibition halls accept.

Frame, double-sided printing and reprints

The straight shape gives a flat backdrop; the horizontally curved shape wraps the space slightly and frames photographs better. Double-sided printing carries a different message on each face when the stand is walked through, or the same image on both when it faces two aisles. Already own the frame? Order the printed cover alone: the same structure then carries a new message each season, within our stands range.

Preparing your file

Supply CMYK artwork at 300 DPI, with 2 mm bleed and a 4 mm safety margin. Keep logos and text away from the edges: the cover folds behind the tubes all round.

2M Numérique at your side

Your display wall is prepared in our workshop in Manciet, in the Gers, 100 % Made In Occitanie: see our responsible approach. We check the scale and framing of your artwork before production starts.